Ingredients：imported acrylate emulsion, pigment, imported accessory ingredients and water.
Coat appearance：subdued light
Features：good breathability and good water resistance
more strong covering power
excellent scrubbing resistance
good penetration
excellent adhesive force
excellent weather resistance and stain resistance
Excellent acid and alkali
Good construction performance
Application instructions：Construction temperature：5℃-40℃
Recoating time：above 2 hours/25℃
Dilution status：at most 15-20% of water（W:W）use after stirring uniformly
Paint consumption：theoretical value 11-13m2/l
Storage requirements：stored in 0℃-35℃ dry and cool conditions.
Application range：cement plaster surface, brick structure, asbestos board, timber surface and plaster board.
Construction requirements: water addition amount should be the same for every bucket; the coat should be thin and uniform
Basic requirements：basic layer must be dry, no oil, grease and other attaching substances. For new wall, recommend brushing VD-6000 seal primer and coating finishing coat twice. Use high pressure water to wash for loose paint film or use the scraper to remove. The temperature of wall body is below 10%; PH≤10
Executive standard：GB/T9755-2001
Shelf life ：12 months